Fullband® MIMORAD® 4G/5G Antenna
The Fullband® MIMORAD® antenna works with all global 2G, 3G, 4G & 5G mobile networks, it can be used with many styles of routers, including those that have a MAIN and AUX antenna connections.
It is fully IP 67 rated, waterproof, and wind resistant to 120 MPH. It can be positioned indoors/outdoors, in the optimum position to capture the best 2G/3G/4G signal and deliver it to a connected device, its vertical beam width and Back to front ratio ensure that it will deliver the best performance at all times. The MIMORAD 4G/5G antenna is Omni-Directional, If you require a directional type, contact us for another product.
The nominal Gain of this MiMo antenna is 6dBi and the antenna can be wall or pole mounted, and dimensions are 70mm Diameter x 350mm height, supplied with fitting brackets.
The MIMORAD® antenna is pre-terminated with 2 x 5m RG58 low loss shielded cables terminated with SMA Male connectors to fit directly to the antenna ports of your 4G or 5G Router. If you need to extend the cable length then you will need two antenna extension cables. Please also remember that if you are using antenna extension cables that your extended cable length will depend upon the signal strength of the mobile network at the antenna location. If your signal strength is excellent then you can extend up to 20m, depending on best signal location.
What is MiMo?
MIMO (multiple input, multiple output) is an antenna technology for wireless communications in which multiple elements within an antenna are used at both the source (transmitter) and the destination (receiver). The antennas at each end of the communications circuit are combined to minimise errors and optimise data speed. MIMO is one of several forms of smart antenna technology that enable faster speeds on 4G and 5G. With the appropriate amount of spectrum and good network engineering, a Long Term Evolution (LTE) based network has the potential to reach 500 Mbps, current rates on most M2M/IoT routers are normally around the 40-50Mbps. The MIMORAD® antenna, is more than capable of handling fast data transfer rates, again benefiting from the availability of 4G and 5G routers.
MIMORAD® Futureproofing.
We have had excellent feedback from both commercial & single end user customers. The new 2022 model will ensure that if any new frequencies are allocated within the GSM/GPRS band and 3400-3600MHz 5G bands, the antenna is completely future proof, and will work as expected, giving excellent results regardless of the frequency within the selected 5G and GSM/GPRS bands.
MIMORAD® Installation.
The MIMORAD antenna can be mounted indoors for In-Building communications, loft and of course for best results, outdoors. We have supplied this antenna to many leading global wireless companies, and it is proving to be a very successful resolution for their wireless requirements.
MIMORAD® Technical Specification
The technical information can be found on our data sheet, with radiation patterns, VSWR, sizes and other important information, to help you, our wireless engineers are only a phone call or email away, should you require any help regarding the MIMORAD 4G/5G Antenna.
BUY THE MIMORAD 4G/5G ANTENNA – Click Here
Do you need a 5G Antenna or need a CSL Signal Analyser or 5G Router?